suitable for 28mm figures = apx 1/56 scale
apx 30" (660mm) diameter
Lead Time:
Dispatch within one week
Unpainted resin = £130 Fully painted & flocked = £250. To add storm poles = £8 for each Bastion

This model is in stock

This is the full five pointed Star Fort kit which includes:

5 x Linked Gun Bastions

4 x Angled Courtine Sections

2 x Gateway Sides (left and right)

Fully cast in resin

Note: This is the five point version – to make a standard four sided Star Fort (or Sconce) you will need 3 x non angled courtine pieces.

Suitable for most European or North American conflicts between 1590 and 1800.

I would recommend the gateway side pieces are attached to each bastion with magnets, blu-tak or similar – allowing you to increase the overall size of the Star Fort with additional courtine lengths.

The gateway entrance was often protected by a Ravelin, forcing the enemy to expose its flank during any attack.

I can also add Storm Poles to the bastions if required.

Available in raw resin or fully painted and flocked as shown.

This is quite a large kit measuring almost 30″ (660mm) in diameter and weighs apx 3.5kg in total.